Xbox 360 E71 Error Repair Tips

One of the errors that you may experience on your Xbox console is the Xbox 360 error e71. Very often this problem can be accompanied by a ring of red lights on the front of your console. In this article, you will learn what causes the Xbox e71 code, as well as if there is anything you can do to fix the problem.

Unlike the more common “red ring of death” and e74 problems, the Xbox 360 e71 error is not caused by overheating that damages the graphics processor unit (GPU) or video scaler chip ( HANA / ANA). However, the problem is that no one is 100% sure what actually causes the e71 in the first place.

The issue is most likely related to dashboard and console updates, such as the Fall 2006 update. Also, the issue seems to arise from gamers improperly updating their hardware or performing failed firmware hacks that then prevent them from the system works properly.

Have you recently updated your Xbox 360 in any way, or have you (or someone else) tried some form of hacking or firmware flash? If so, this is probably the cause of the e71 code on your Xbox, however it could also be completely random.

Fixing the Xbox e71 is quite tricky. First of all, you can try to fully reset your Xbox 360. To do this, go to the dashboard, go to the rightmost column, press “Initial Settings”, and then follow the instructions on the screen.

If you are unable to access this screen due to error e71 on your Xbox 360, you can try holding down the “Y” button on your controller while turning on the console. This will enter the same process and restore the factory default settings. However, there is still a chance that this will not work and you will get stuck with the e71 code.

Leave a Reply

Leave a Reply

Your email address will not be published. Required fields are marked *